Four Types Of Gutters, Formed On Site
Gutter Solutions LLC forms four types of gutters at the house for homes and businesses across Southeast Georgia: K-style and half-round, 6, 7 or 8 inches wide, plus a 7-inch box and a 7-inch D commercial profile, in aluminum or copper.
- K-style & half-round: 6", 7", 8"
- Box & D commercial: 7"
- Aluminum or copper
- Color samples at your estimate
Get Your FREE Gutter Profile Estimate
We measure each run and put the profile, width and metal in writing.
- Four profilesK-style, half-round, box, D
- Three widths6", 7" and 8" troughs
- Houses to warehousesMatched to the roof it drains
- Written specificationProfile, width and metal
See each gutter profile up close
Choose a shape to see it in each metal. The profile decides how the gutter looks from the street and how much water it holds; the width decides how much roof one run can serve.
K-Style
Formed 6, 7 or 8 inches wide
Aluminum
The everyday choice here: light on the fascia, with a baked-on color to match most trim.
Copper
A crisp K-style line in bright metal that weathers to brown, then green, with soldered corners.
Steel
Stiffer against ladder dents, but it relies on its coating, a concern on walls facing salt water.
Half-Round
Formed 6, 7 or 8 inches wide
Aluminum
An older house keeps its period outline for less than copper, in colors that suit painted trim.
Copper
The classic pairing for historic homes, often with round downspouts or a rain chain at the entry.
Steel
A rounded trough with extra rigidity; near the marsh its coating has to stay intact.
Box
Formed 7 inches wide
Aluminum
Square sides and a flat bottom in a painted finish that suits modern lines and big roof planes.
Copper
In copper, the square profile reads as a deliberate architectural detail, not plain drainage.
Steel
Rigid enough for long, heavy runs; its coating is all that stands between it and rust.
7-Inch D Commercial
Formed 7 inches wide for commercial roof areas
Aluminum
A deep commercial trough that stays light enough to hang in long runs across warehouse eaves.
Copper
The deep D outline in copper, for buildings where the trim is part of the design.
Steel
Where equipment knocks are a worry, steel adds stiffness to the deep D shape.
The profile renders are Gutter Solutions LLC artwork. Physical color and finish samples come to your estimate, so you can hold them up to your own trim.
Four types of gutters, compared side by side
The comparison we walk through at the estimate, in one table.
| Profile | K-style | Half-round | Box | 7-inch D commercial |
|---|---|---|---|---|
| Shape | Flat back, molded front face | A true half circle | Square sides, flat bottom | Straight sides into a deep, rounded base |
| From the street | Reads like crown molding | Soft, traditional curve | Crisp, modern line | Plain and utilitarian |
| Widths we form | 6", 7" and 8" | 6", 7" and 8" | 7" | 7" |
| Holding capacity | More than a half-round of equal width | Less at equal width; the smooth curve clears easily | Deep and square, high for its width | Deep, sized for commercial runoff |
| Usual downspout | Rectangular | Round | Rectangular | Large rectangular |
| Best suited to | Most houses in the region | Historic and period homes | Large planes, modern designs | Warehouses, retail, multi-family |
Widths are the sizes formed on site. Real capacity also depends on roof pitch, the number of outlets and downspout size; see choosing a gutter width for your roof. Not sure which profile fits? Call (912) 202-0537.
The profiles in four numbers
- 4ProfilesK-style, half-round, box and D
- 6″–8″Width rangeK-style and half-round, matched to the roof
- 7″Box & D widthFor bigger roof planes
- 1Piece per straight runJoins only at corners, ends and outlets
Six things that decide your gutter profile
Most houses narrow to one or two profiles quickly. These are the questions that settle it.
- House style. Crown-molded K-style suits most brick ranches and newer builds; half-round belongs on Victorians, cottages and period homes.
- Roof draining to each run. Big, steep planes and valleys push a run toward 7 or 8 inches, and large commercial roofs toward box or D. See how we gutter larger commercial roofs.
- Roofs that spill onto roofs. A second-story roof that empties onto a porch roof sends its runoff into the gutter below as well.
- HOA and historic rules. Master-planned communities often set gutter colors, and historic districts may review exterior changes, so check before you pick.
- The downspouts you will see. Round downspouts belong with half-round; rectangular ones suit K-style and box, and sit flatter to the wall.
- Budget, honestly. Aluminum K-style is usually the most economical choice. Wider troughs use more metal, and copper costs more again: a pricier metal, joined by hand with solder.
What customers say about the finished job
Real reviews from our Google Business Profile — not written by us.
Read our reviews on Google
Our Business Profile carries every review our customers have left, with photos from the jobs and directions to find us.
Aluminum or copper: the metal sets the look and the upkeep
All four profiles are roll-formed from coil at the house; here is how a seamless run is formed and hung. Aluminum is the standard: it does not rust, comes in baked-on colors and keeps the load on your fascia light.
Copper is left bare, joined with solder, and weathers from bright metal to brown and eventually blue-green. Steel appears in the renders for comparison; the estimate confirms which metals suit each elevation, especially near salt water.
- Aluminum: widest color range
- Copper: soldered corners
- Hardware matched to the metal
- Advice for coastal homes
Questions about choosing a profile
Still have a question? The quickest answer is a phone call, and we will talk it through with you.
(912) 202-0537K-style is the most common profile on houses in this region. Its flat back sits tight to the fascia, its molded face suits brick ranches and new subdivisions alike, and it holds more than a half-round of equal width. Gutter Solutions forms it 6, 7 or 8 inches wide.
The type, or profile, is the shape of the trough: K-style, half-round, box or D. The size is its width across the top in inches, 6, 7 or 8 here. Shape decides how the gutter looks and how deep the water sits; width decides how much roof one run can drain before it spills.
It can: half-round across a front porch where it shows, for example, with K-style on the rear elevations. Most houses still look best with one profile all the way round, and the call is easy to make standing in front of the house at the estimate.
Rarely. A wider trough is matched to the roof above it, so on a two-story house with long, steep planes a 7- or 8-inch gutter looks in proportion from the ground. On a single-story ranch with short runs, 6 inches usually suits both the roof and the look.
Every type we offer is. K-style, half-round, box and the 7-inch D are all roll-formed from coil at the house, so a straight run is normally one piece, with joints only at the corners, end caps and outlets. That includes half-round, a profile often sold off the shelf in short sections.
See the profiles against your own house
We bring color and finish samples, measure every run, and recommend the profile and width your roof needs, in writing and free.
Call or text(912) 202-0537Forming K-style, half-round, box and 7-inch D gutters across 27 Georgia counties and the SC Lowcountry.