Will fitting guards disturb my shingles?

That depends on the roof, which is why we look at the roof edge before quoting: the type of shingle or metal roofing, the drip edge, and how the back of the guard will sit against them. Gutter Solutions LLC does not do roofing. If the edge of the roof itself needs work, you will hear that at the estimate, so a roofer can deal with it before any guard goes on.

Do guards change how the gutters look from the street?

Very little. The guard sits across the top of the trough, so from the yard you mostly see the same gutter face as before. Panels are cut to length at every corner and end, which keeps the eave line tidy rather than patched together.

Should I have the gutters cleaned before the guards go on?

No need to book it separately. Fitting guards starts with emptying and flushing the runs, because sealing a clog under new mesh would defeat the point. Anything we find while the gutters are open, such as a dripping corner or a low spot, is pointed out before the first panel goes on.

Are guards worth it on a two-story house?

Two-story rooflines are where guards pay back fastest, because every cleaning otherwise means a tall ladder or someone walking the roof. The fewer times anyone has to go up there, the better, and a guard cuts those trips down.

What happens to the guards if a gutter needs work later?

Guard panels are screwed in place along the front lip of the gutter, so a run can be uncovered for a repair and the panels put back afterward. Resealing a corner or replacing a hanger under a guard is a routine job, not a reason to tear the guards off.

Rhino micro-mesh gutter guards

Rhino Gutter Guards That Keep Pine Straw on Top

Gutter Solutions LLC handles gutter guard installation with Rhino rigid metal micro-mesh, fitted over new seamless gutters or sound existing ones, so needles, oak leaves and tassels sit on the mesh instead of packing the trough and plugging the downspouts.

Rigid metal mesh, not plastic
Fits new or existing gutters
Stops needles dropping in
Roof edge checked first
Free written estimate

Call (912) 202-0537 Get a Free Estimate

Check us out for yourself Reviews Customer reviews Facebook

Get Your FREE Gutter Guard Estimate

We check the gutters and the roof edge before we quote.

Your name

Phone number

Email address

ZIP code So we know which crew covers you.

What do you need?

I agree to receive text messages from Gutter Solutions LLC about my estimate request, appointments and job updates at the phone number I provided. (Optional)

Message frequency varies. Msg & data rates may apply. Reply STOP to opt out or HELP for help. Consent is not a condition of purchase. See our Privacy Policy and Terms of Service.

By submitting, you're asking Gutter Solutions LLC to contact you about your request by phone or email. We never sell your information. Prefer to talk? Call (912) 202-0537.

Metal micro-meshToo fine for needles to slip in
New or existing runsExisting gutters must be sound
Roof edge checkedShingles, drip edge and pitch
Written estimateFree and measured on site

Rhino Guard micro-mesh leaf guard installed along the edge of a shingled roof

Metal, not plasticHolds its shape in summer heat

The Rhino guard

What a Rhino micro-mesh guard actually is

Short answer

A Rhino gutter guard is a rigid metal frame carrying a fine micro-mesh that covers the whole top of the gutter. Rain passes through the mesh; pine needles, leaves and tassels stay on top, where they dry out and can blow or rinse off.

The frame spans the trough from the roof edge to the front lip of the gutter and is screwed along that lip, so it sits firm instead of resting loose the way a snap-in screen does.

Look closely and you can see the mesh is formed into a shallow S-curve ripple instead of lying flat. Like corrugated sheet metal, a formed profile is stiffer than a flat sheet of the same material.

Frame screwed along the front lip
Fine metal mesh over the whole trough
Panels trimmed at corners and ends
Fitted run by run

Call (912) 202-0537 Price guards for my house

Every guard is a trade-off. This is how the common types behave under pine and oak, put as fairly as we can.

Compared on	Open screen	Foam insert	Brush insert	Reverse-curve hood	Rhino micro-mesh
How it works	Perforated metal or plastic sheet over the trough	Porous foam wedge that fills the trough	Round bristle brush laid in the trough	Solid cover; water follows the curved nose into a slot	Fine metal mesh on a rigid frame over the trough
Pine needles	Needles spear the holes and wedge upright	Needles stick in the top and hold moisture	Needles weave into the bristles	Needles can ride the water into the slot	Needles lie flat on top of the mesh
Oak leaves	Mat across the surface	Break down on the foam	Tangle in the bristles	Mostly shed off the nose	Collect on top; rinse off
Heavy downpours	Passes water until matted	Can overflow once the top clogs	Water runs beneath the bristles	Fast sheets of water can shoot past the nose	Passes water readily while the surface is clear
Upkeep	Pulling wedged needles, lifting panels	Removing, cleaning or replacing the foam	Pulling and shaking out every brush	Clearing the slot, often awkwardly	An occasional rinse or soft brush of the top
Weak spot	Plastic sags and cracks in summer heat	Sun breaks it down; seeds can sprout in it	Fine debris still settles underneath	Changes the look of the roof edge	Needs a sound, well-pitched gutter under it

General trade knowledge, not a laboratory test. For a longer look at which guards handle pine straw, read the guide.

Our rule on guards

A guard is only as good as the gutter under it. If a run sags, leaks or slopes the wrong way, we fix it first, or we tell you plainly that it needs replacing.

How Gutter Solutions LLC fits guards

Call (912) 202-0537 Book a guard estimate

Before and after: dead leaves piled at a gutter corner below a roof valley, then a metal mesh guard with a mesh corner piece in the same spot

From our job photos. Before: leaves piled at a gutter corner under a roof valley. After: a metal mesh guard with a mesh corner piece over the same spot.

New or existing gutters

Gutter guard installation on new runs or the gutters you have

Guards go on most easily with a new system: the runs are hung, pitched and sealed, and the mesh can follow at the same visit. If the old gutters are due to come down anyway, pairing guards with gutters roll-formed on site saves a second trip up the ladder.

Existing gutters can take a guard if they are sound. Before we quote, each run is checked for fall to its outlet, tight hangers, dry corners and big enough downspouts. A guard over a sagging or leaking run only hides the fault, so that run is repaired first, or, if it is past saving, we talk about replacing worn-out gutters.

We also look at the roof edge: the shingle or metal roofing, whether there is a drip edge, and how the back of the guard will meet it. If that edge needs a roofer, you will know before anything is fitted.

Fall checked run by run
Hangers and corners inspected
Downspout size confirmed
Roof edge and drip edge reviewed

Call (912) 202-0537 Get my guard estimate

Honest upkeep

What a guard still asks of you

A guard cuts down how often anyone has to climb up, but it does not end it. Here is what to expect, and a seasonal cleaning schedule if you want the detail.

Rhino micro-mesh gutter guard with a wave pattern running along a gutter below dark asphalt shingles

Our install

Needles sit on the mesh, not in the trough

That is the whole point of fine mesh: whatever lands on it stays where wind, rain or a soft brush can move it.

A rinse after pollen season

Pollen and oak tassels can film the mesh in spring. A gentle rinse or a soft brush brings the flow back.

A look at the downspouts

The finest grit still travels. Checking the elbows now and then keeps every outlet open.

Less often, not never

Heavy pine cover asks for more attention than a few hardwoods. The trees over your roof set the pace.

Or leave it to us

Guarded gutters get the same visit as any other: surface cleared, outlets checked, downspouts flushed.

Book a maintenance visit

Is it worth it?

Signs a guard would earn its keep on your house

Pines or oaks within reach of the roof, or tall enough to drop on it in a wind.
Gutters full again in weeks even though they were cleared not long ago.
Overflow in every storm along the same stretch of roof.
Seedlings in the trough where old debris has turned to soil.
Elbows that clog every spring when the oaks let go.
A two-story roofline or a steep roof nobody should be climbing.

None of these at your house? Then guards may not be worth it yet, and we will say so.

Google Reviews

What our customers say

Real reviews from our Google Business Profile — not written by us.

Read our reviews on Google

Our Business Profile carries every review our customers have left, with photos from the jobs and directions to find us.

Read our Google reviews Leave us a review

Where guards matter most

Rhino guards from the Okefenokee to the coast

Tree cover changes from county to county, and so does what ends up on the mesh.

Okefenokee country

Ware County

Ware County takes in a large part of the Okefenokee Swamp, and the drier ground around Waycross is pine country, so needles reach roofs in every month. Pine straw around Waycross is what decides the guard there.

Pecan country

Pierce County

Pecan orchards are part of the farm economy in Pierce County, and a pecan beside the house drops catkins in spring, then leaves and husks in the fall. On homes around Blackshear, all three settle on the mesh instead of in the trough.

Live oaks

Chatham County

Every spring the live oaks in Savannah drop leaves, tassels and Spanish moss over the squares and the older streets around them.

Second homes

McIntosh County

About one home in seven in McIntosh County is kept for seasonal or occasional use, more than seven times the Georgia share. On second homes around Darien, a guard means fewer clogs building up unseen between visits.

Marsh and pine

Camden County

Around St. Marys homes and Kingsland, pine and oak cover runs right up to the marsh, and gutters fill fastest after the spring and fall drops.

New streets

Bryan County

Many newer neighborhoods around Richmond Hill were cut out of pine woods, so young gutters meet mature trees at the lot line.

Not on this list?

We fit guards across 27 Georgia counties and the SC Lowcountry. Check whether we cover your area or call and ask.

Questions

Rhino gutter guard questions

Still have a question? The quickest answer is a phone call, and we will talk it through with you.

(912) 202-0537

Pine is the main reason we fit micro-mesh. Needles from slash, loblolly and longleaf pines are stiff enough to spear the holes in an open screen, but micro-mesh openings are too small for a needle to pass through end-first, so the needles land flat on the surface instead of dropping into the trough.

Some straw will rest on the mesh after a heavy drop. On a steep roof much of it slides or blows off; on a shallow porch roof it may need brushing off now and then.

Related services

More around the gutter line

Gutters for your homeSizing, color and downspout placement The profiles we form on siteK-style, half-round, box and 7-inch D Everything we doInstallation, repair, drainage and trim

A gray two-story house with a front porch and a black garage door, with pine trees behind it

Free guard estimate

Get a written price for Rhino guards on your house

Call or text to book a visit. We look at the trees, the gutters and the roof edge, then put the guard price, and any fixes the gutters need first, in writing.

Call or text(912) 202-0537

Call Now Text Us Free Estimate